The PalletPal Roll-On Level Loader with Turntable is specifically engineered to simplify and streamline pallet handling operations. With its low-profile design, the unit can be easily lowered to floor level, allowing pallets to be rolled on and off using a hand pallet truck. The lift height can be adjusted with a pushbutton or foot control to maintain an ideal working height.
The built-in 360° turntable enhances efficiency by allowing workers to rotate the pallet, ensuring that they are always loading and unloading from the nearest side. This reduces the need for excessive reaching, thereby minimizing the risk of injury. The unit’s design includes toe protection on three sides, providing enhanced safety for operators.
Not sure which material handling solution will work best in your process or application? A Southworth product specialist can help. Select your region below to connect with a team member.
One moment while we find a specialist for your area...
This is a normal condition caused by work-hardening of metal.
No repair is necessary.
Excessive “rumble” when the rotating ring is turning
PalletPal 360
Possible Cause
Check This
Excessive wear or lack of lubrication to bearings under the turntable
Remove the turntable and replace the bearings.
Top of lift bounces
PalletPal 360
Possible Cause
Check This
Damaged shock absorber
Check for leaks or dents. Replace if necessary.
Top of lift rotates away from me/towards me on its own
PalletPal 360
Possible Cause
Check This
Frame of unit not level
Move the unit to a level surface or install the optional adjusting feet to level base frame.
Lift lowers too hard and too late
PalletPal 360
Possible Cause
Check This
The springs may be too strong
Check the spring ratings.
Lift lowers too easily and too early
PalletPal 360
Possible Cause
Check This
Springs may be too weak
Check the spring ratings.
Lift lowers too slowly
PalletPal Roll-On (All ROLL-C Models)
Possible Cause
Check This
Down valve may not be fully open or stuck closed
Remove down valve and clean.
Flow control may need adjustment
Adjust flow control as needed.
Lift raises too slowly
PalletPal Roll-On (All ROLL-C Models)
Possible Cause
Check This
Low voltage
Check voltage at motor to ensure proper voltage is being supplied.
Foreign material clogging suction filter, breather cap or pressure line
Remove necessary components and clean.
Insufficient oil causing pump to overheat
Check oil level and oil viscosity.
Lift will not lower
PalletPal Roll-On (All ROLL-C Models)
Possible Cause
Check This
Down valve may be de-energized
Check the solenoid on the valve with a voltmeter.
Flow control needs adjustment
Adjust flow control as needed.
Lift fails to hold or drifts down
PalletPal Roll-On (All ROLL-C Models)
Possible Cause
Check This
Down valve may be leaking
Remove down valve and inspect for debris which may be preventing it from closing.
Down valve may be energized
Ensure that the down valve coil is not being energized when the up button is pushed. Verify no stray voltage to down valve coil preventing it from being fully closed. Check the wiring.